通過式噴淋清洗機適用于各種行業的壓鑄件清洗，并配有電加熱系統，可設置恒溫裝置，具有多工位，功能全，結構合理，操作方便，清洗效果好的優點，對于流水線零件的清洗，改善勞動環境，提高清洗質量有重要意義。其使用范圍較廣，適用于各種五金零件，壓鑄件，液壓件，齒輪，軸承，汽車零部件等各種制造業。

The pass-through spray cleaning machine is applicable to the cleaning of die-casting parts in various industries. It is equipped with an electric heating system and can be equipped with a constant temperature device. It has the advantages of multiple stations, full functions, reasonable structure, convenient operation and good cleaning effect. It is of great significance for the cleaning of parts in the assembly line, improving the working environment and improving the cleaning quality. It has a wide range of applications and is applicable to various manufacturing industries such as various hardware parts, die-casting parts, hydraulic parts, gears, bearings, auto parts, etc.

通過式噴淋清洗機工作前先檢查清洗液的配方濃度和配方比例是否合適，水箱液面高度是否夠；分別調定清洗液箱和漂洗液箱的電接點溫度計為50-60度；用鑰匙將電源控制開關，置于開位置；開啟加熱器，使其開始自動加溫；開啟浮油排除裝置開始浮油排除，因此式水泵未開啟，水面平靜，排油效果好。

Before working, check whether the formula concentration and proportion of the cleaning solution are appropriate and whether the liquid level of the water tank is high enough; Set the electric contact thermometer of cleaning solution tank and rinsing solution tank to 50-60 degrees respectively; Turn the power control switch to the ON position with the key; Turn on the heater to start automatic heating; Start the oil slick removal device to remove the oil slick, so the water pump is not started, the water surface is calm, and the oil drainage effect is good.

等溫度升到預定值后即開始工作，操作者根據需要選擇開關，按每個單動按鈕，使水泵，吸霧，輸送等全部動作。當機器運行后，操作工人便可以在裝料口不斷地把零件裝載輸送網帶，清洗，漂洗，吹干，輸出，在卸料口取下清洗好的零件

After the temperature rises to the preset value, the operation starts. The operator selects the switch according to the need, and presses each single-action button to make the water pump, mist suction, transportation and other actions. After the machine is running, the operator can continuously load the parts into the conveyor belt at the loading port, wash, rinse, blow dry, output, and take down the cleaned parts at the unloading port

通過式噴淋清洗機清洗工作結束后，當零件取下，按停止按鈕，全機停止。清洗液應定期添加自來水和一定比例的金屬清洗液以補充消耗，使液面保持在一定高度，如果清洗效果達不到工藝要求時，應全部更換清洗液。清理設備污垢后，關閉電源。

After the cleaning of the through-type spray cleaner is completed, when the parts are removed, press the stop button to stop the whole machine. The cleaning fluid shall be regularly added with tap water and a certain proportion of metal cleaning fluid to supplement the consumption, so as to maintain the liquid level at a certain height. If the cleaning effect cannot meet the process requirements, the cleaning fluid shall be completely replaced. Turn off the power after cleaning the dirt on the equipment.

通過式噴淋清洗機設備在操作使用過程中為了能夠保證設備的良好性能，都是存在一定條件以及要求的。希望大家能夠通過上述所介紹的這些設備知識能夠?qū)Υ蠹也僮魇褂迷O(shè)備有所幫助，詳細了解關于清洗機設備的使用要求還是非常有必要的。更多相關內容就來我們網站http://m.slzjx.cn咨詢吧！

In order to ensure the good performance of the equipment during the operation and use, there are certain conditions and requirements. I hope you can help you operate and use the equipment through the equipment knowledge described above. It is necessary to understand the requirements for the use of the cleaning machine in detail. Come to our website for more relevant content http://m.slzjx.cn Ask!