在許多客戶選擇和購買超聲波清洗機械和設備后，為了充分發揮其使用價值，人們普遍期望該機器和設備能夠持續工作。試圖結束這些年來，機械和設備必須長期休息。

After many customers choose and purchase ultrasonic cleaning machinery and equipment, in order to give full play to its use value, it is generally expected that the machine and equipment can continue to work. Trying to end these years, machinery and equipment must rest for a long time.

事實上，設備和人是一樣的，也會造成疲勞，無論設備多么好，更多的使用也會受損。例如，汽車滿是里程，需要損壞超過600000。每個人的超聲波清洗機和設備也是，超聲波清洗機設備的基本原理是依靠振動頭不斷振動來清洗物體，如果連續使用不清楚維護應用，不僅會降低使用壽命，而且還會使振動器的振幅不斷減弱。即便如此，使用超聲波清洗機和設備的合適方法是什么？正確使用超聲波清洗設備：

In fact, equipment and people are the same, can cause fatigue, no matter how good the equipment, more use will also be damaged. For example, the car is full of mileage and needs to be damaged more than 600000 km. Everyone's ultrasonic cleaning machine and equipment is also, the basic principle of ultrasonic cleaning machine equipment is to rely on the vibration of the vibration head to clean the object, if the continuous use is not clear, maintenance and application, not only will reduce the service life, but also will make the vibration amplitude of the vibrator continue to weaken. Even so, what is the proper way to use ultrasonic cleaning machines and equipment? Proper use of ultrasonic cleaning equipment:

1.嚴格按照手冊進行實際操作和維護

1. Carry out actual operation and maintenance in strict accordance with the manual

2.不要超過使用的時間；不要放置在潮濕和遠離熱源的地方。

2. Don't use it for more than the time; don't put it in the place that is wet and far away from heat source.

3.避免空燃。罐內應少加2/3的水。

3. Avoid air combustion. The tank should be filled with at least 2 / 3 water.

4.嚴禁加熱易燃易爆物品，如柴油、乙醇等。

4. It is forbidden to heat inflammable and explosive materials, such as diesel oil and ethanol.

為了超聲波清洗機和設備連續工作的問題，通過模型討論了中小型超聲波清洗機械和設備不能長期啟動和應用，必須使用一段休息時間，如停工30分鐘，連續工作10~30分鐘。當然，也有工業生產模式，可持續工作24小時，但也建議對設備進行一段時間的休息，長期總結可能導致破壞。

In order to solve the problem of continuous operation of ultrasonic cleaning machine and equipment, this paper discusses that small and medium-sized ultrasonic cleaning machines and equipment can not be started and applied for a long time, and a period of rest must be used, such as stopping work for 30 minutes and working continuously for 10-30 minutes. Of course, there are also industrial production modes, which can work for 24 hours. However, it is also suggested that the equipment should be rested for a period of time. Long term summary may lead to damage.