超聲波清洗機能快速把粘附在物件上的污垢處理，達到清潔目的。所以超聲波清洗機在我們生活中的應用中越來越廣泛，很多人都想學習超聲波清洗機的操作流程，今天小編就為大家介紹購買超聲波清洗機的注意事項及操作步驟。

The ultrasonic cleaning machine can quickly remove the dirt adhered to the objects to achieve the purpose of cleaning. Therefore, ultrasonic cleaners are more and more widely used in our lives. Many people want to learn the operation process of ultrasonic cleaners. Today, Xiaobian will introduce the precautions and operation steps for purchasing ultrasonic cleaners.

購買清洗機注意事項：

Precautions for purchasing cleaning machine:

清洗槽的規格大小。對于其尺寸的選擇來說，在進行挑選的時候，應該根據工件的規格與需求進行考慮，當然這屬于一個基礎性的問題。

The size of the cleaning tank. For the size selection, it should be considered according to the specification and requirements of the workpiece, which is of course a fundamental problem.

了解上下料輸送系統的完整性。這一點對于清洗機來說是重要的一個系統，只不過在進行程序控制的時候，我們應該了解具體的內部構成，這樣在進行操作的時候，才可以確保其上下料的輸送更加的順利與有效。

Understand the integrity of the loading and unloading conveying system. This is an important system for the washing machine. However, we should know the specific internal composition when carrying out program control, so that we can ensure that the feeding and unloading of the washing machine is more smooth and effective during operation.

明確自動控制體系的有效性。相比于手動操作來說，自動控制體系的出現也是屬于一個明顯。

Clarify the effectiveness of the automatic control system. Compared with manual operation, the emergence of automatic control system is also obvious.

超聲波清洗機操作步驟：

Operation steps of ultrasonic cleaning machine:

1、安裝時要參考說明書，了解到機器是由電控柜與主機，連接的是380VAC電源，安裝清洗機進水管、排水管和溢流管。安裝一切完畢。

1. During installation, refer to the manual to learn that the machine is connected to the main machine by the electric control cabinet and 380VAC power supply. Install the water inlet pipe, drain pipe and overflow pipe of the washer. Installation is complete.

2、添加適量水水面高度要超過清洗零件高度，但在注意不要超過3/4。

2. The height of the water surface added with proper amount of water should exceed the height of the cleaned parts, but it should not exceed 3/4.

3、給清洗機水加溫，啟動加熱開關，調好適當溫度，一般在60度，因為清洗劑適宜溫度不超過70度，加入清洗劑充分攪拌溶解

3. Heat the water of the cleaning machine, start the heating switch, and adjust the appropriate temperature, generally at 60 ℃. Because the appropriate temperature of the cleaning agent does not exceed 70 ℃, add the cleaning agent to fully stir and dissolve it

4、零部件清洗前用到把零件表面的污垢處理掉，這讓就可以讓清潔更簡單，設備壽命也在加長。

4. The dirt on the surface of the parts should be removed before cleaning the parts, which can make cleaning easier and prolong the service life of the equipment.

一般來說，超聲波清洗機在使用的時候是需要符合操作規程的，這也是為了確保操作者的而考慮的，這方面對于操作人員的技術要求是嚴格的，您還有什么使用問題或者說需求就來我們網站m.slzjx.cn咨詢吧！

Generally speaking, the ultrasonic cleaning machine needs to comply with the operating procedures when it is used, which is also considered to ensure the safety of the operator. In this regard, the technical requirements for the operator are strict. If you have any questions or needs, please come to our website m.slzjx.cn for advice!